JetCat

## NEW ##: now also with the option Taxi Tank (demo Video)

The VSpeak ECU converter for JetCat ECU is plugged into the ECU or IO board instead of JetCat GSU.

Following ECUs are supported:

https://sites.google.com/a/vspeak-modell.de/vspeak-modell/jetcat/ECU_V6.jpg?attredirects=0
https://sites.google.com/a/vspeak-modell.de/vspeak-modell/jetcat/ECU_V10.jpg?attredirects=0
https://sites.google.com/a/vspeak-modell.de/vspeak-modell/jetcat/Pro_Interface.jpg?attredirects=0
https://sites.google.com/a/vspeak-modell.de/vspeak-modell/jetcat/V12.jpg?attredirects=0

The ECU data can be transmitted by the ECU Converter over the telemetry channel to the radio.

Telemetry and ECU connector of the VSpeak ECU Converter are electrically isolated, to avoid repercussions of the turbine control to the receiver.

The VSpeak ECU converter is available for the following remote control systems:

    • Jeti Duplex (EX-Sensor / EX-Bus)

    • Multiplex MLink (MSB)

    • Graupner HoTT

    • Futaba

    • FrSky S.Port

    • JR PROPO

    • PowerBox core P²-Bus

    • Spektrum X-Bus / SRXL2

The respective remote control system (except Spektrum X-Bus) can be set using the programming adapter and the JetCat GSU. Individual parameters can also be set:

Setup / Programming adapter

The VSpeak ECU Converter is updatable.

Detailed information about VSpeak ECU Converter JetCat can be found in the detailed manual.

With the VSpeak ECU Converter for Jeti Duplex and Graupner HoTT not only the data of the terminals can be displayed. With the help of the radio keys all inputs are possible. The handling is similar to the JetCat GSU (see YouTube video).

Jeti Duplex EX

PowerBox core

Graupner HoTT

programming adapter

FrSKY Horus

FrSKY Taranis

Futaba (JetCat V10 display)

Futaba (single sensors)

Multiplex MLink

JR PROPO

Spektrum XBus

JetCat telemetry adapter